The MB-19 is a compact, lightweight production matte box which is ideally suited for use with
the ARRIFLEX 16SR 3 in Super 16 format. When mounted on the new lightweight support
LWS-3, graduated filters can be pushed through unhindered. Side flags with adjustable segments,
used in conjunction with the top light shield provide optimum protection against unwanted light.
Also available are sets of clip-on mattes for use with both 16 mm and 35 mm formats. By use of
additional adapters the matte box can also be mounted on the 15 or 19 mm support rods of
conventional bridge plates, for use with 35 mm camera as well as with the 16SR.
The MB-19 is supplied with a filter stage for two 4" x 5.65" filters. The front filter can be pushed
through vertically, the rear filter can be displaced horizontally and additionally rotated. The filter
stage is fitted with a rear receptacle for 138 mm diameter filter rings as well as for an additional
filter stage for one 4" x 5.65" filter and one 138 mm round filter.
To simplify lens changing, the matte box swings out. For quick adaptation to different lens lengths,
the matte box can be moved back and forth with a lockable adjustment knob. A holder for
secure mounting of french flags is included.
- Filter size 4" x 5.65" / round 138mm
- Compact lightweight matte box for medium-wide primes, 16 mm and HD zooms.
- Compatible with ARRI lightweight support.
- With adapter, compatible with studio bridge plate and ARRI HD baseplate.
|1||MB-19 basic module|
|1||19mm bars adaptor|
|1||French Flag Holder|
|1||Set of 6 hard mattes|
|1||PV Filter tray (Hor)|
|1||PV Filter tray (Ver)|
|Min focal length 16 mm lenses||6 mm|
|Min focal length 35 mm lenses||14 mm|
|Max. numbers of filters (with Additional filter stage)||three 4 x 5,65 filters and one 138 mm round filter|
|Dimensions||270 x 220 x 95 mm (10.6 x 8.7 x 3.7 in)|
|Weight||approx. 800 g (1.8 lbs.)|
Please complete the form below to enquire about "ARRI MB-19 Production Matte Box"